The key of corrosion resistance and abrasion resistance of heavy hammer fan blade

The key of corrosion resistance and abrasion resistance of heavy hammer fan blade:

The blade of heavy hammer fan has bad working environment and is easy to be damaged by abrasion. Excellent protective coatings shall be selected. The coating needs to meet the corrosion resistance of the blade and improve its service life, and the emphasis is on the shock resistance and wear resistance, and it can provide a smooth aerodynamic surface for the fan blade, thus increasing the conversion efficiency of the fan. It is required to have good adhesion, high wear resistance, weather resistance and atmospheric corrosion resistance.

With the development of coating market, many enterprises are looking for new market breakthroughs. They have focused their attention and development direction on wear-resistant coatings, and the heavy hammer fan has the following characteristics:

1., it is made up of macromolecule material, wear-resistant Department of orthopedics, superfine powder and inorganic polymer dispersion. The coating is tightly packed after curing and has good adhesion. It is not easy to fall off and has good thermal resistance and denaturation. 2., coating performance is stable, the use of acid and alkali resistant special raw materials, it is difficult to react with the media. Very good environmental corrosion resistance. 3., made of fine resin specially made, the molecular structure is stable, not easy to aging decomposition. 4. high resistance experiments showed that ZS-911 wear resistant waterproof coating wear resistance of 16Mn steel is 10 times, 9 times as 65Mn steel, refractory castable 50 times, and with the increase in temperature, change of wear resistance of waterproof coating wear is very small. Wear resistant material is the core of new material, wear-resistant coating is an important wear-resistant material, wear-resistant coating is widely used, and has a very broad prospect and market. Wear resistant coatings especially widely used in wind power, chemical plants, cement plants and other fields, and ZS-911 wear waterproof coating except for the blade itself, can also be used in wind power, chemical equipment and other fields, and has a good effect.